In the fireplace insert it is forbidden to burn any other fuel than that designated for its purpose.
It is also forbidden to burn liquid fuel and waste. Under no circumstances should petrol, alcohol,
solvents, etc, be used for ignition! The use of any other fuel than that permitted will damage
the fireplace insert and load the environment and will also automatically invalidate the warranty.
The freplace insert is technically adapted for the combustion of air supplied from the
exterior. If during assembly the freplace insert was not connected to this external air
supply, it is necessary to ensure a suffcient quantity of combustion air in the room
by ventilation. Do not use the freplace insert together with other heating equipment
or a consumer appliance that may create under-pressure in a closed room.
Components for controlling the air supply into the freplace insert must not be
modifed.
2. FUEL
It is forbidden to interfere with the construction of freplace insert. If any
unauthorized technical modifcations are made, the manufacturer will not bear
any liability for safety during the operation of equipment and the warranty will
be automatically invalidated. Only spare parts approved by the manufacturer
must be used.
1.8. UNAUTHORIZED TECHNICAL MODIFICATIONS
1.7. SUPPLY OF COMBUSTION AIR
2.1 FORBIDDEN FUEL
06
2.2. PERMITTED FUEL
It is only permitted to burn only wood in natural condition with the
humidity 18 % in A.caminetti fireplace inserts.
2.3. TYPES OF WOOD
The volume of energy contained in one kilogram of wood is approximately
the same for all types of wood. However, the individual types of wood differ
by volume, i.e. density.
For ignition it is recommended to use wood with a lower density – soft
wood (spruce, pine, poplar, fir)
For regular adding, wood with a higher density is recommended – hard
wood (oak, beech, ash), that burns with calm flame and creates a steady
heat.
