Immediately after receipt of the consignment, check:
- that there is no visible damage
-
that the consignment is fully complete and contains:
- Installation and User Manual
- Warranty Certificate
IMMEDIATELY NOTIFY YOUR SUPPLIER OF ANY POTENTIAL DEFECTS AND DISCREPANCIES.
9. CHECKING THE PRODUCT.
that all movable parts and mechanisms are functional
-
16
10. CORRECTPOSITIONING OF THE
FIREPLACE INSERT.
When choosing the correct position for the fireplace insert, the following
requirements should be taken into consideration:
- The position of the fireplace insert must be approved by the construction supervisor
(chimney foreman).
- A sufficient air supply must be ensured in the room. Burning 1 kg of the wood requires
approximately 12 m3 of air.
- There must not be any electric cables running through the wall or ceiling where the
fireplace insert will be installed.
- The distances from walls and floors as well as distances from electricity cables and
flammable materials in walls and ceilings, e.g. wooden beams, must also be taken into
account.
- The consumer appliance must be positioned on a floor with the respective floor load
capacity.
The fireplace must not be positioned in rooms:
- where there is no air supply for burning
- where flammable and explosive substances or mixtures are processed, stored or produced
- where by the exhaustion of air, the under-pressure originates towards outdoor
environment (ventilators, fume hoods, ventilation and heating equipment,
ventilation driers, etc.)
