12
•
When the battery pack is not in use, keep it away
from objects that can create a connection between
the terminals, such as paper clips, coins, keys, nails,
screws or other small metal objects.
Short-circuiting the
battery terminals may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected from
the battery; avoid contact.
If contact accidentally occurs,
flush with water. If liquid contacts eyes, seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Service
•
Have your power tool serviced by a qualified repair
person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
•
When servicing a tool, use only identical replacement
parts.
Follow the instructions in the Maintenance section of this
manual. The use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury.
Specific safety rules for cordless drill/driver
• Hold power tool by insulated gripping surface when performing an
operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a “live” wire will also make exposed metal
parts on the tool “live” and shock the operator.
• Wear hearing protection during extended periods of operation.
Exposure to noise can cause hearing loss.
• Use auxiliary handle(s), if supplied with the tool. Loss of control can
cause personal injury.
• Wear safety goggles or other eye protection. Hammering and drilling
operations cause chips to fly. Flying particles can cause permanent
eye damage.
• Use a dust mask or respirator for applications if the operation
is dusty.
• Secure the workpiece. Clamping devices or a vise will hold the
workpiece in place better and more safely than holding it by hand.
• Be aware that this tool is always in an operating condition, since it
does not have to be plugged into an electrical outlet.
• Accessories and tool may get hot during operation. Wear gloves
when handling them if performing heat producing applications such
as drilling metals.
Safety rules for battery pack and charger
WARNING!
This manual contains important safety and
operating instructions for your battery and charger. Before
using the charger, read all instructions and warnings on the
charger, the battery pack and the tool.
• If the battery pack casing is cracked or damaged, do not insert into
charger. There is a danger of electric shock or electrocution.
• Don
,
t allow any liquid to get inside charger. Electric shock may result.
To facilitate cooling of the battery pack after use, avoid placing the
charger or battery pack in a warm environment such
• Never attempt to open the battery pack for any reason. If the plastic
housing of the battery pack breaks or cracks, immediately
• Never attempt to open the battery pack for any reason. If the
plastic housing of the battery pack breaks or cracks, immediately
discontinue use and do not recharge.
• The length of service from your battery will depend on the type
of work you are doing. The battery has been designed to provide
maximum trouble-free life. However, like all batteries, it will
eventually wear out.
• To obtain the longest possible battery life, we suggest the following:
- Store and charge your battery in a cool area. Temperatures above or
below normal room temperature will shorten battery life.
- Never store the battery in a discharged condition. Recharge it
immediately after it has been discharged.
• All batteries gradually lose their charge. The higher the temperature,
the quicker they lose their charge. If you store your tool for long
periods of time without use, recharge the battery every month or
two. This practice will prolong battery life.
Battery pack removal and preparation for recycling
To preserve natural resources, please recycle or dispose of batteries
properly. This product contains a lithium-ion battery. Local, provincial or
federal laws may prohibit disposal of lithium-ion batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
Touch_IM_ED8.indd 12
22/10/13 4:39:56 PM
