background image

5

  Dress properly. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from moving 

parts. Loose clothes, jewellery or long hair can be caught 

in moving parts.

  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used. Use of dust collection can 

reduce dust-related hazards.

4). Power tool use and care

  Do not force the power tools. Use the correct power tool 

for your application. The correct power tool will do the job 

better and safer at the rate for which it was designed.

  Do not use the power tool if the switch does not turn it 

“on” and “off”. Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools. Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

  Store idle power tools out of the reach of children and do 

not allow persons unfamiliar with the power tool or these 

instructions to operate the power tool. Power tools are 

dangerous in the hands of untrained users.

  Maintain power tools with care. Check for misalignment 

or binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s operation. 

If damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 

tools.

  Keep cutting tools sharp and clean. Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control.

  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into account 

the working conditions and the work to be performed. 

Use of the power tool for operations different from those 

intended could result in a hazardous situation.

5). Use and care of the battery pack

  Ensure the key switch is in the OFF position and the 

key is removed before connecting or disconnecting the 

battery pack.

  Recharging only with the charger specified by the 

manufacturer. A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack.

  Use power tools only with specifically designated battery 

packs. Use of any other battery packs may create a risk 

of injury and fire.

  Avoid contact with any liquid that is emitted by a battery. 

If the battery pack is abused, liquid may escape from 

the battery. Liquid emitted from the battery may cause 

irritation or burns. If liquid comes into contact with the 

skin, wash the area immediately with soap and water, 

and then neutralize the liquid with lemon juice or vinegar. 

If contact occurs, rinse thoroughly with running water. If 

liquid comes into contact with the eyes, rinse thoroughly 

with running water and seek medical help.

  Store battery pack in well ventilated, dry and cool 

conditions, and avoid direct sunlight and rain.

Additional safety instructions for the  

inbuilt battery pack  

(Applicable if you have a Key Start unit only)

• 

The inbuilt battery pack for this tool has been shipped in 

a low charge condition. You should charge the battery 

pack fully before use.

• 

To ensure the longest battery life and best battery 

performance, always charge the battery when the air 

temperature is between 18–24°C. Do not charge the 

battery pack when the temperature is below 0°C, or above 

40°C. This is important. Failure to observe this safety rule 

could cause serious damage to the battery pack.

• 

Do not incinerate the inbuilt battery pack even if it is 

seriously damaged or can no longer hold a charge.  

The battery pack can explode in a fire.

Содержание PS26W





















Отзывы: