909 PS26W, Инструкция по эксплуатации

Страница: 4 / 20

4
General safety instructions for handling
power tools
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
This unit may not be used by people (including children)
with reduced physical, sensory or mental capacities, with a
lack of experience and without the appropriate knowledge,
unless they are supervised by someone who is responsible
for their safety or have been instructed by such a person
with regard to how the unit is to be operated.
Children should be supervised to ensure that they do not
play with the device.
Save all warnings and instructions for
future reference
1). Work area safety
• Keep work area clean and well lit. Cluttered or dark areas
invite accidents. Rags, cloths, cord, string and similar
items should never be left around the work area
• Do not operate power tools in explosive environments,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks, which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause the operator to lose
control.
2). Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
grounded power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
• Avoid body contact with grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is
increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Replace
damaged cords immediately. Damaged or entangled
cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor reduces the risk of electric shock.
• To reduce the risk of electric shock, the manufacturer
recommends the use of a residual current of 30mA or
less at all times.
3). Personal safety
• To reduce the risk of electric shock, the manufacturer
recommends the use of a residual current of 30mA or
less at all times.
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection will
reduce personal injures.
• Prevent unintentional starting. Ensure the switch is in
the “off” position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the
power tool on. A wrench or key left attached to a rotating
part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.