8x8 Inc Tango VTA464, Руководство пользователя

Страница: 9 / 34

5
Getting To Know Tango
You can use your Tango with any standard analog telephone, including a cordless
phone (UIP160P or UIP165P) or a speakerphone for a hands-free experience.
Below is an illustration of the front and back panel of the 8 x 8 VTA464
1. Power Port - Connect the included power cord here.
2. Reset Switch - The Reset button is used in rare cases when the Tango may
function improperly. Resetting the Tango will restore the Tango's normal oper-
ation while maintaining the programmed settings. We recommend that you
consult a
8 x 8 customer service representative before using this button.
3. WAN - The WAN port is used to connect Tango to your cable or DSL modem or
to your existing router.
4. LAN - The LAN port is used to connect Tango to your computer or other net-
working device.
5. Line - The Line port is used to connect Tango to your telephone handset. Use
the included telephone cable to connect your phone to this port.
6. Power/Service Light - The Power/Service Light will glow red to indicate
power or orange to indicate you are registered with a 8 x 8 .
7. WAN Light - The WAN light is green to indicate that your Tango’s WAN inter-
face is connected. It blinks rapidly when information is being sent over the port
to the Tango.
8 . LAN Light - The LAN light is green when a PC or other networking device is
connected to the TANGO with a network cable.
5
4
3
2
1
6
9
8
7
10
11
12
13
14 14