8x8 Inc Tango VTA464, Руководство пользователя

Страница: 22 / 34

1 8
5. Use the Browse key to locate the image you would like to upload.
6. Click on Upload new image .
7. If you followed the instructions correctly, you should be presented with a
screen that states, "File upload successful." Click the
OK button.
8 . The next screen will give you an opportunity to upload additional images and
show you the images you have already uploaded under the section "Images in
Library." Please note that you can delete and/or view images from this screen
as well.
Note: Image files must be in JPEG format with a maximum size of 640x4 8 0
pixels. However, for optimal performance, you may want to resize or crop
your images to 320x240 pixels. To resize/crop your images, go to
http://photo. 8 x 8 .com .
Tip: Once your favorite images have been uploaded, you can go to "Screen
Saver Settings" under the Setup Menu key to select picture frame as your
screen saver.
In-Call Display Settings
Display Video Preview - This setting will turn on/off your self-view display when
your phone is off hook.
Display Lost Media Icons - This setting will show audio or video loss during your
call session, indicating that you may need to adjust your Bandwidth settings. Use
the up and down arrow keys - or go to the Video Settings menu to adjust Band-
width settings.
Call Status - Indicates whenever the call is connected or disconnected.
Network Settings
WAN Interface - Select your type of WAN configuration for your Tango. You have the
option of DHCP, Static IP or PPPOE.
DHCP - The Tango is configured for use with Dynamic Host Configuration Protocol
(DHCP) by default. If your broadband connection uses DHCP, simply connect your
phone's WAN port to your broadband modem and then connect the phone's
power cord to an AC power outlet.
Static IP Address - If your provider gave you a static IP address, select this option
and fill out all the information required: IP address, subnet mask, default gateway
and DNS address.
PPPOE - If your broadband connection uses PPPoE, you will need to configure the
Tango by inputting the user name and password provided by your Internet Service
Provider.