8e6 Technologies Threat Analysis Reporter TAR Скачать руководство пользователя страница 49

Страница: 49 / 76

6 T

hreaT

nalysis

eporTer

uick

TarT

uide

Reboot >

Shutdown >

NOTE:

Navigation tips in the 8e6 menu:

• Use the up / down arrow key to scroll up / down the menu

• Press the checkmark key to choose the current selection

• Press the “X” to go back to the previous screen

Make a selection from the menu, and press the checkmark key to go to that screen.

Current Patch Level

When the Current Patch Level option is selected, “Threat Analysis Reporter” and the ver-

sion number of the currently installed build displays.

IP / LAN1 and LAN2

When the IP / LAN 1 (LAN 2) option is selected, the IP / LAN 1 (LAN 2) screen displays

with the following menu items:

Configure LAN 1 (2) IP

Change LAN1 (2) Netmask

A. Choose

Configure LAN 1 (2) IP

and press the checkmark key to go to the Configure

LAN 1 (2) IP screen.

B. Use the up / down keys to increase / decrease the current value, and the left / right

arrow keys to navigate across the line.

C. Press the checkmark key to accept your entry and to return to the previous screen.

D. Choose

Change LAN1 (2) Netmask

and press the checkmark key to go to the

Change LAN1 (2) Netmask screen.

E. Use the up / down keys to increase / decrease the current value, and the left / right

arrow keys to navigate across the line.

F. Press the checkmark key to accept your entry and to return to the previous screen.

G. Press the “X” key to return to the 8e6 menu.

•

Содержание Threat Analysis Reporter TAR













































































Результаты поиска

Содержание Threat Analysis Reporter TAR

Отзывы:

Похожие инструкции для Threat Analysis Reporter TAR

Бренды по названию

Популярные бренды

8e6 Technologies Threat Analysis Reporter TAR, Быстрый старт

Результаты поиска

Содержание Threat Analysis Reporter TAR

Отзывы:

Похожие инструкции для Threat Analysis Reporter TAR

Бренды по названию

Популярные бренды