8e6 Technologies HL-002-006 Скачать руководство пользователя

Страница: 41 / 94

6 e

nterprise

eporter

uick

tart

uide

Step 1C: LCD Panel Setup Procedures

The ER can be configured using the LCD panel on front of the chassis bezel. When the

bezel is placed on the front of the chassis, with the USB plug inserted into the USB port,

the default LCD screen displays with the following message:

8e6 Technologies

Display Initializing

Please Wait

To the right of the LCD screen, the keypad displays, consisting of the following keys: up

arrow, down arrow, left arrow, right arrow, checkmark, and “X”.

Storage Device Setup (for Attached Storage Units)

If you have a

NAS (Fibre Channel Connected Storage Device or “SAN”) that will be used

with the ER, you will need to connect it to the ER at this point. Refer to the Appendix

at the end of this document for instructions on how to connect the Fibre Channel Con-
nected Storage Device.

LCD Menu

Press the “X” key to display the LCD Menu:

In the LCD panel, an arrow displays to the left of the currently selected menu item. Use

the up or down arrow keys to navigate the menu. After making your menu selection,

press the checkmark key to accept your selection.

NOTE:

On the LCD Menu, press “X” to toggle the display between the main

menu and the following information: “Enterprise Reporter (software version num-

ber)” and “Database Status (Active, Inactive)”.

Содержание HL-002-006































































































Результаты поиска

Содержание HL-002-006

Отзывы:

Похожие инструкции для HL-002-006

Бренды по названию

Популярные бренды

8e6 Technologies HL-002-006, Быстрый старт

Результаты поиска

Содержание HL-002-006

Отзывы:

Похожие инструкции для HL-002-006

Бренды по названию

Популярные бренды