5DT Data Glove Ultra Series Скачать руководство пользователя страница 54

Страница: 54 / 60

respectively, which is the

inverse

of the auto-calibration settings. If auto

calibration was turned off, it is turned on again.

void fdGetSensorMaxAll(fdGlove *pFG, float *pMax)

Obtains the maximum scaled value for each sensor.

Return value

None.

Parameters

pFG

Pointer to a glove device. This is the value returned by

fdOpen()

pMax

Array of floating point values that will contain the maximum scaled sensor
values. The size of the array must always match the value returned by

fdGetNumSensors()

Remarks

The glove driver defaults to a maximum scaled value of 1 for each sensor.

float fdGetSensorMax(fdGlove *pFG, int nSensor)

Obtains the maximum scaled value for a specific sensor.

Return value

Returns the maximum scaled values of the sensor.

Parameters

pFG

Pointer to a glove device. This is the value returned by

fdOpen()

nSensor

Index of the sensor that is being queried. The value must lie in the range given
by the enumerated type

EfdSensors

, or alternatively from zero to the value

returned by

fdGetNumSensors()

minus one.

Remarks

The glove driver defaults to a maximum scaled value of 1 for each sensor.

void fdSetSensorMaxAll(fdGlove *pFG, float *pMax)

Sets the maximum scaled value for each sensor.

Return value

None.

Parameters

pFG

Pointer to a glove device. This is the value returned by

fdOpen()

pMax

Содержание Data Glove Ultra Series





























































Результаты поиска

Содержание Data Glove Ultra Series

Отзывы:

5DT Data Glove Ultra Series, Руководство пользователя, Страница: 54 / 60

Результаты поиска

Содержание Data Glove Ultra Series

Отзывы: