manualshive.com logo in svg

5DT Data Glove Ultra Series, Руководство пользователя, Страница: 45 / 60

Поделиться
Скачать
5DT Data Glove Ultra Series Скачать руководство пользователя страница 45

 

 

 

 

 

41

Glove Type 

The glove type identifier byte. The following values are defined: 

0x00

 – Data Glove14 Ultra wired right hand glove 

0x01

 – Data Glove14 Ultra wired left hand glove 

0x02

 – Data Glove14 Ultra wireless right hand glove (Port A) 

0x03

 – Data Glove14 Ultra wireless left hand glove (Port A) 

0x06

 – Data Glove14 Ultra wireless right hand glove (Port B) 

0x07

 – Data Glove14 Ultra wireless left hand glove (Port B) 

0x10

 – Data Glove 5 Ultra wired right hand glove 

0x11

 – Data Glove 5 Ultra wired left hand glove 

0x12

 – Data Glove 5 Ultra wireless right hand glove (Port A) 

0x13

 – Data Glove 5 Ultra wireless left hand glove (Port A) 

0x16

 – Data Glove 5 Ultra wireless right hand glove (Port B) 

0x17

 – Data Glove 5 Ultra wireless left hand glove (Port B) 

 

Version 

The firmware version byte. The upper nibble (Vmaj) represents the version 
major, the lower nibble (Vmin) represents the version minor. 

xHl 

The upper four bits of the 12-bit sensor value, or the lower nibble of the MSB of 
the 12-bit sensor value. 

xLh 

The middle four bits of the 12-bit sensor value, or the upper nibble of the LSB of 
the 12-bit sensor value. 

xLl

 

The lower four bits of the 12-bit sensor value, or the lower nibble of the LSB of 
the 12-bit sensor value.

 

Checksum 

The 8-bit checksum is computed by adding all the data bytes.

 

Footer 

Packet stop byte defined as the ‘>’ character. Hex value: 

0x3e

 

 

 

Содержание Data Glove Ultra Series





























































Отзывы:

Нет отзывов