This manual is the property of
. No part of it may be reproduced in any form.
MIRAGE Line Compressors Instruction Manual
Installation
Handling
The entire area in which the compressor is
handled, including the transport vehicle parking
area and the area designated for installation of
the compressor, must be specifi ed and inspected
beforehand in order to allow the identifi cation of
“DANGER ZONES”.
Personal protective equipment
4 - 01
All compressors are shipped on a pallet that can be handled by a forklift or pallet truck.
Except for the smallest models, all other compressors must be moved using suitable
handling equipment.
Take care during handling, lifting and transport to prevent damage to the compressor or
other property and personal injury.
Check the weight of the compressor and use a forklift truck or suitable lifting equipment.
When lifting the compressor use caution to avoid damage.
While transporting the compressor lash securely it to the vehicle both crosswise and
lengthwise.
Packs of the same weight can be stacked up to three high.
Unpacking
Remove the compressor from the pack carefully.
Keep the pack for possible future shipping requirements.
If the pack shows signs of damage, sign the shipping agent's delivery note
under reservation and keep the pack for possible inspection by the transport
company.
If you need to contact the distributor or the manufacturer, always quote the
compressor serial number to aid rapid identifi cation.
The equipment serial number is always transcribed on the transport document.
Assembly
Install the compressor indoors or anyway in a place where it is not directly exposed to the
weather.
The room in which the compressor is installed must be well ventilated and not damp;
if the compressor is installed in a plant room air circulation must be suffi cient for all the
equipment installed; ambient temperature must be no higher than 40°C and no lower than
0°C.
The product feet are fi tted with rubber vacuum cups. These are essential because they
reduce vibration and thus help to reduce the noise level while also limiting any movement of
the unit while it is running.
