33
Adding a 15cm Pole Tube Extension
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the system.
3.
Remove the pole-type 2nd display module.
4.
Unplug the cable from the socket and remove the screw to release the grounding cable.
5.
Detach the base from the pole by twisting the two apart.
6.
Place the cable through the extension tube, then tighten the two tubes together.