11
Removing and Opening System Box
CAUTION:
To prevent loss of work and damage to the system or drive:
If you are inserting or removing a drive, shut down the operating system
properly, turn off the system, and unplug the power cord. Do not remove a drive
while the system is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While
handling a drive, avoid touching the connector.
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
3.
Unlock the system box.
4.
Firmly and slowly pull on the handle to remove the system box.
5.
Remove the two screws indicated at the rear of the system box.
Key Lock