4ms Sampler Скачать руководство пользователя страница 5

Страница: 5 / 20

Tutorial 1: Basic Playback

Tap the

PLAY

button to play the currently selected sample in the currently selected

bank. Tap it multiple times to re-trigger the sample.

Try it now! Set the channel controls as shown:

•

Pitch

knob to center

•

Start Pos

to 0%

•

Length

to 100%

•

Patch the

OUT Left

and

OUT Right

jacks to the left and right channels of your output

mixer. (If you only have a mono speaker, just use

OUT Left

The

Sample

knob selects which sample in the current bank to play. There are 10 slots

for samples per bank. Try turning the knob now. Notice that when you turn it to a new
slot number (1–10), the

PLAY

button flickers. This indicates you selected a new sample.

Hit the

PLAY

button again to play the new sample.

You also can select a sample using the

Sample

CV jack. It accepts voltage from 0V to

+5V, so a new sample is selected every 0.5V.

The

Bank

button changes banks. Tap the button to go to the next bank and notice that

the

Bank

button’s color changes. Each bank contains 10 samples. Go ahead and listen

to all the samples in this bank using the

Sample

knob to select a sample and the

PLAY

button to play it. Take a moment to explore a few banks, tapping the

Bank

button to go

to the next bank (you can go back a bank by holding

Reverse

while tapping

Bank

). For

the next step, we’re going to want a sample that will loop nicely, so pick a sample that's

at least a couple seconds long.

You also can select a bank using the

Bank

CV jack. It accepts voltage from 0V to 5V,

and there are 60 banks, so a new bank is selected every 1/12th of a volt. That means

you can select banks by playing a CV keyboard or sequencer into this jack: each

semitone (note) from C0 to B5 will be a different bank.

Looping

The

Sampler

is also great for looping

samples. Go to a sample that’s at least a

couple seconds long. Press and hold the

PLAY

button for half a second and the

button will turn blue to indicate it’s looping
(

blue = loop

). You can let go of the

PLAY

button and it’ll keep repeating the sample
over and over. If at any time you want to stop looping, hold

PLAY

down again for about a

second and it’ll turn green or yellow to indicate the channel is playing but not looping.

Now let’s play with

Pitch

. Turn this knob up to make the sample play back faster and at

a higher pitch. Turn it down to play back slower and lower in pitch. The

Pitch

knob has a

range of 8 octaves (4 octaves up, 4 octaves down).

The

Pitch

CV jack accepts voltages from -5V to +5V, which is a 10 octave range. The

jack is calibrated to 1V/oct, but we recommend calibrating to your own equipment (see

Calibration

, page 14).

The total amount of pitch shifting when considering the jack and knob is limited to 9

octaves down and 4 octaves up.

Page of

Sample

Pro tip:

When looping, if you move the

Sample

knob it’ll immediately start

playing  the  new  sample  (as
opposed  to  when  not  looping,  you
have  to  hit

PLAY

to hear the new

sample)

Pitch

Play

Bank

Sample

Bank

Pitch

Hold 0.5 sec.

Play

Looping

Содержание Sampler





















Результаты поиска

Содержание Sampler

Отзывы:

Бренды по названию

Популярные бренды

4ms Sampler, Руководство пользователя

Результаты поиска

Содержание Sampler

Отзывы:

Бренды по названию

Популярные бренды