Basic features:
•
Two independent delay/loop channels, synchronized to a common time base
•
Almost 3 minutes of time per channel (2:54) in 16-bit mode, for a total of nearly 6 minutes
•
48kHz/16-bit sampling rate, option available for 24-bit sampling (results in 88 seconds delay/loop time per channel)
•
Extremely quiet, low-noise and low-jitter design
•
Normaled connections of input and output for flexible use in mono, stereo, cascading, or parallel mode
•
Tap tempo button and clock Ping input set the timing for one "beat"
•
Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
•
Sample-accurate master clock output for perfect synchronization
•
Loop clock outputs for each channel
•
Time switches change range of Time knob from 1/8th notes up to 32 bars
•
Digital feedback, up to 110%
•
Delay Level control, independent of dry/wet signal mix
•
Infinite Hold mode disables recording and plays a loop
°
Start and End points of loop can be modified in real-time for “scrubbing” or “windowing” effects
•
Reverse mode plays memory contents backwards
•
Resonant Delays (ala Karplus-Strong)
°
External clock input can track an external VCO up to 2kHz, and multiply it up to 16kHz
°
Time CV jack can respond at 1V/octave in
Unquantized Time Mode
•
Trigger inputs for toggling Infinite Hold and Reverse
•
Send and Return on each channel for feedback with external modules
•
CV jacks to control Time, Delay Feed (record level), and Feedback
•
As new features are developed, firmware can be updated by playing an audio file into the DLD
°
Open-source design allows the DLD to be a versatile platform for custom firmware
•
System Settings Mode for fine-tuning parameters such as 1V/oct tracking response, and gate/trigger clock output
•
Buffer can be cleared with a button press
•
20HP Eurorack module
Controls and jacks:
Channels A and B are identical and separate, except for the common clock and audio normalizations.
Controls
•
Ping button: Tap a tempo to set the base clock = one
beat
°
Base time can also be set by an external clock
•
Time knob per channel: sets the loop time in number of
beats
. Ranges from 1 to 16
•
Time switch per channel: modifies the Time knob setting
°
Down = 1/8 notes. Loop/delay time will be 1/8 to 16/8 = 2
beat
°
Center = normal. Loop/delay time will be 1 to 16
beat
°
Up = +16. Loop/delay time will be 17 to 32
beat
•
Feedback knob per channel: sets amount of signal read from memory to be written ahead in the future
•
Delay Feed knob per channel: sets amount of input signal from the In jack to be written to memory
•
Mix (Dry/Wet) knob per channel: cross-fades between signal on In jack (dry) and the signal read from memory (wet)
•
Reverse button per channel: reverses the direction of memory read/write
°
Reverse feature is toggled when the button is released (not when it is depressed)
•
Infinite Hold button per channel: toggles between Delay and Loop mode
°
Delay mode works like a traditional echo or looping delay by recording and playing continuously
°
Loop mode disables writing, and plays a loop whose length is set by the Time parameter
°
Hold is toggled when the button is released
Jacks:
•
Two audio inputs per channel
°
In (Main)
°
Return (from external feedback loop)
•
Two audio outputs per channel (A/B)
°
Out (Dry/wet mix)
°
Send (Delay signal only)
•
Ping input (clock sync)
•
Main Clock output (stable master clock, quantized to sample rate)
•
Loop clock output per channel (loop/delay time of each channel)
•
Three CV input jacks per channel
°
Time (-5V to +5V)
°
Feedback (0V to +5V)
°
Delay Feed (0V to +5V) (can be re-assigned to control Mix)
°
CV jacks respond into the low audio range
•
Two trigger inputs per channel (A rising edge of at least 1.6V on either jack toggles the parameter)
°
Reverse
°
Hold
2
Содержание Dual Looping Delay
Страница 16: ...16 ...
