4IPNET HSG800, Руководство пользователя

Страница: 4 / 108

User’s Manual
IEEE802.11 b/g Outdoor AP/Bridge (Support IEEE802.11a Client Backhaul)
OWL800 / OWL2000 / HSG800
ENGLISH
FCC Regulatory Information (for US)
FCC Certification
OWL800, HSG800 and OWL2000 use the same circuitry and housing except the billing and bandwidth management. The
devices
operate in the 2.4 GHz and 5.725 - 5.85 bands. They
are evaluated and certified according to FCC Rules Part 15
subpart C under one granted FCC-ID: VZ9090001.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
For complying with the
FCC radio frequency exposure requirements,
t
he following antenna installation and device
operating configurations must be satisfied:
ƒ
The device must be professionally installed on a fixed or permanent structure with a separation distance of at
least 20cm from all persons.
ƒ
This device and its antennas must not be co-located or operating in conjunction with any other antenna or
transmitter.
ƒ
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
FCC Class B Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates and uses radio frequency energy and, if not installed and used in accordance with the instructions, may
cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
ƒ
Reorient or relocate the receiving antenna or cable input device.
ƒ
Increase the separation between the equipment and receiver.
ƒ
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
ƒ
Consult the dealer or an experienced radio/TV technician for help.