4IPNET HSG800, Руководство пользователя

Страница: 16 / 108

User’s Manual
OWL800 / OWL2000 / HSG800
ENGLISH
© 2008 4IPNET, INC.
7
3.2 Software Configuration
3.2.1 Instruction of Web Management Interface
OWL800 provides the web management interface for configuration. OWL800 is a multi-mode system which can be
configured as either an access point ( AP/Relay Mode with RF1 in AP ), a relay ( AP/Relay Mode with RF1 in WDS ),
or a gateway that clients can associate on it based on your needs. It is required to follow the respective installation
procedures provided to properly set up the desired mode of this system.
After completing hardware installation, the administrator can configure the OWL800 via web browsers.
The default IP address and Subnet Mask of different modes are as follows:
Mode AP/Relay Gateway
IP Address
192.168.2.1 192.168.1.1
Subnet Mask
255.255.255.0 255.255.255.0
Default Gateway
192.168.2.254 192.168.1.254
Enter
“admin” as the default Username and “admin” as the default Password and click Login to continue.
Note: If you are unable to get to the login screen, please check the IP address used. The IP address should be in
the same subnet of the default gateway. For using static IP in TCP/IP setting, set a static IP address such as
192.168.1.x for your network interface and then open a new browser again.