4IPNET EAP220, Быстрое руководство по установке

Страница: 7 / 17

Quick Installation Guide
EAP220 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
3
Rear Panel
1 2 3 5 6 4
Figure 2 EAP220 Rear Panel
1 Restart/ Reset Press once to restart the system; to reset the system to factory default settings,
hold for more than 5 seconds.
2 WES Button (RF B)
For IT administrators to easily setup WDS links with two RF cards.
3 Console port
To access EAP220 via the console interface.
4 LAN 1 - 4 ports The ports for connections with LAN side devices.
5 Uplink Port The port for uplink connection to another gateway or device. PoE (802.3at) is
supported.
6
12V 2 A
Power Socket for the power adaptor.
Right-Side Panel
On the right side of the panel there is a Kensington slot. Admin can also fill it with a rubber plug.