07
11.2 Turn on the remote control switch (step 1) , the
remote control power supply, the indicator light,
the throttle lever up to the top (step 2) and then push
to the bottom (step 3) , the frequency success, the
aircraft, the lights from flashing to always bright.
11.3 Horizontal alignment operation
：
Short press the remote control one button calibration key,
the aircraft LED flash. The LED on the aircraft is always bright and
calibrated, and the remote control gives out a “Beep”sound.
(fig 1)
11.4 START/STOP：
Push the left lever on the remote control upward (Fig. 2) ,
then the aircraft can take off normally, after taking off,
the aircraft, all indicators are always on. During start-up,
pull the left joystick down and the vehicle slowly stops.
Fig 1
Fig 2
Aircraft/remote control, must be fully charged or can not take off!
1
2
3
11.5 One-button take-off and landing:
When the frequency matching is completed, press the function key of “One-button take-off/
landing”of the remote control (Fig. 4) , the aircraft will automatically rise to an altitude of about
1 meter, keep the altitude stable, and then press this function key lightly, the craft will land slowly
and automatically.
Fig 4
Bedienungsanleitung24.de
