4Ddoors 4DR2, Инструкция по установке и руководство пользователя

Страница: 19 / 24

Installation Instruction and User Guide
16
►Photo cell on/off setting
Press and hold SET Button until 1.- appears on the display
Press SET to enter the PE function interface setting option
interface
（
Example: The default 6.0 means that the PE function
is closed
）
Pre ss UP or DOWN switchto6.- Function menu option interface
Example: If the PHOTO CELL DEVICE is installed, Press UP or
DOWN to enter switch to 6.1, means that the PE function is
open
）
Photo cell on/off setting
NOTE
：
Our roller door opener need to use the
normally closed status NC photo cell device
，
and
need to be connected to PE of opener
（
Make sure
the photo cell has been correctly installed and
used Normally closed contacts to the accessory
terminals of the opener.Also note that the photo
beam function must be disabled if NO photo
beams are fitted,otherwise the door cannot be
closed,and the LED display will show the letter
as an indication).
a, Press and hold SET Button until
appears on the display
，
next press the
UP/DOWN button until appears on the
display
（
PHOTO CELL ON/OFF SETTING
）
.
b, Press the SET button again to enter ON/OFF
setting,then you will see appears on the
display.
c, Press UP/DOWN button to set the photo cell
function ON/OFF switch.
means
：
the function interface is closed.
means
：
the function interface is open.
d, Press SET button to confirm the set and it will
be back to standby status automatically.
REMARK: The photo cell is set on
as standard in factory
，
function closed.
Press SET button to confirm the set and it will be back to
standby status automatically and display ||