Installation Instruction and User Guide
8
opener sungear assembly as far as possible (without disturbing the roller door) and ensure
that one of the reel spokes is completely between the sungear assembly axle or extension
poles of the opener.
• Install the bracket to replace the roller door axle to the position marked by the wall bracket for
locking and fixing.
• After the motor is fixed on the door shaft using a saddle (preload approx. 28-30N.m).
• Remove all ropes and the support stand.
• For the operation of manual inspection door, the manual lifting and lifting shall operate
smoothly without any obstruction, and the clutch handle shall be about 1.8m above the ground.
12.CONTROL PANEL INSTALLATION MANUAL
Explanation:
1. The first startup shows FC,99-00 countdown, and the R indicator is always on after the end
of the countdown.
Standby display
：
1.No stroke standby display
2.
Motor has stroke cycle display
.
Buttons instruction:
SET :
confirm / enter menu settings.
CODE
：
code the remote/ cancel code/menu setting interface exit function.
UP
：
open the door/stop/menu interface function option switch.
DOWN
：
Close/stop/menu interface function option switch.
L/R
：
left/right installation method setting.
L/R LED
：
LED lights up to indicate left / right installation status.
Saddle bolt
Содержание 4DR2
Страница 2: ......
