4Ddoors 4DR2, Инструкция по установке и руководство пользователя

Страница: 18 / 24

Installation Instruction and User Guide
15
Click UP/DOWN button to switch to 5.- function
menu
Remote control button
corresponding number as fig.
Long press SET button and enter menu interface 1.-
►Partial open/height setting
Select and press SET to return to standby
Click the SET button to enter PARTIAL OPEN/HEIGHT
SETTING menu( Factory standard is set on 5.0
）
Example: click UP or DOWN to switch (5.1 means
the half-door position is 1*10%=10%, which
means 10% of the full-stroke opening height)
Remote button note
：
the 1
button & 2 button as a kit,
the 3 button & 4 button as a
kit.
Partial open/height setting
a.Long press SET button till the display board
show
，
hen press UP/DOWN to choose, till
display board show
（
PARTIAL
OPEN/HEIGHT SETTING
）
b.Press SET button to confirm and go to
sub-menu, then the display board show
c.Setting the PARTIAL OPEN/HEIGHT SETTING
grade from -to-
means
：
close the partial open function.
-to- It indicates the percentage of
the set open position in the whole travel.
means the door open height is 10% of the
whole travel......
means the door open height is 90% of the
whole travel
d.Press SET button to confirm the set and it will
back to standby status.
Note
：
1
、
The partial open/height is set on
as standard in factory.
2
、
When the function of half-door is enabled,
there are four keys on the remote control. When
the first key is successfully matched, press the first
key and the door will be fully opened.
3
、
The function of half-door only works when the
position of the door body is lower than the height
of half-door by pressing the half-door key of the
remote control.
4
、
If the automatic closing setting condition is
closed at any position, the remote control will be
used to half-open the door, and the automatic
closing will be performed after the timing is
finished.
Remote control button description
：
The first and
second keys are a combination.The third and fourth
buttons are a combination.