Page 20 of 24
4-acoustic
.com
Channel C
Audio Source
(DSM-428)
Channel A
1+
1-
2-
2+
Channel A
Channel D
1+
1-
2-
2+
1+
1-
2-
2+
Channel B
Channel C
1+
1-
2-
2+
CH D
2 Wire Cable
(1+/1-)
CH A
2 Wire Cable
(1+/1-)
CH C
2 Wire Cable
(1+/1-)
CH B
2 Wire Cable
(1+/1-)
Switch to
Mono Bridge Mode
Figure 9.6
Two Inputs in parallel mode. If you need the same signal on two or more outputs you can set the inputs to parallel mode. That
means the input signal will be internal linked to the next input channel.
Maintain proper polarity (+/–) on output and input connectors. Use Class 2 output wiring.
IMPORTANT: Turn off the amplifier and unplug its power cord.
INPUTS:
Connect analog input wiring for all signals you want to connect to the amplifier.
OUTPUTS:
Speakon® outputs figure 9.6
To wire the speakers connect two wire Speakon® cables (1+/1-) from each speaker to the corresponding
output socket of the amplifier.
DIP SWITCHES:
Select the input sensitivity accordingly your audio source or mixer.
Select the Input Channel you want link into parallel mode. In our sample CHA->CHB and CHC->CHD.
9.) SYSTEM SETUP
9.5) Two Channel Parallel Mode SX48000