Line level Pre Amplifier CAP002
The CAP002 is designed for use with an electret condenser microphone. When connected it will boost
the microphone audio output to a level that can be used to connect to a typical auxiliary line level
input commonly found on amplifiers / mixers or recorders requiring 0.5 Volts RMS (refer to your
external equipment instruction manual).
Power requirements
An external 12V to 24 DC or 24V AC supply with 100mA capacity (not supplied) is required / available
from most high street electrical retail outlets. Some DC adaptors are supplied with a plug already
attached these will need to be removed. Important that you careful check to ensure c/- polarity
of the 2 cables when connecting to the CAP002 pin 1 and 2 of PL2 screw terminals.
Connections
Microphone
CAP002 BOARD
To Mixer Input
AC/DC power adaptor
(not supplied)
