V-Series Camera Quick Start Guide |
VX-2V28-OD-I
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
9
2.
Confirm the PC is networked with the cameras. Launch the utility. If properly networked, the utility will
automatically detect cameras on the network (click
Refresh
to refresh the list).
3.
Select the desired device from the list of available cameras.
4.
Click IP Setup and assign the desired IP.
5.
Fill out installer and company information.
6.
To activate the camera, you will be required to assign a complex password.
7.
Confirm the camera Live View preview is as desired and click Continue.
8.
Adjust any/all camera settings including the camera name and VIGIL Connect alias.
9.
Fill out remaining information and complete steps in the setup tool to receive an installation summary
e-mail.
Note:
The V-Series camera will automatically check for updates and format the SD card. Please allow
15 minutes before power cycling the camera.
2.4
Remote Monitoring and Viewing - Adding a V-Series Camera to VIGIL Client
Steps:
To interface a V-Series Camera with VIGIL Client:
1.
Launch VIGIL Client (
Local Mode
only; VCM mode will only display Servers from a networked VCM
Server) and select
Servers
from the
Servers
top menu. This will launch the Servers window. VISIX
V-Series devices are considered edge recording devices and thus are recognized as their own
VIGIL Server within the VIGIL suite.
2.
Click
Add
. This will deploy the
Add/Edit VIGIL Server
window.
3.
Enable the
Use VIGIL Connect
option. If connecting using traditional network connection criteria
is desired, enter the cameras
IP Address/DNS Name
and confirm TCP/IP port status.
4.
Enter in the VIGIL Connect alias of the desired V-Series Camera (
VIGILTest1
used in the below
example). Skip this step if using traditional network connection criteria (IP/Port).
5.
Click
Test VIGIL Connect
to confirm the camera can be communicated with through the Connect
system using the provided alias. Skip this step if using traditional network connection criteria
(IP/Port).
Figure 2-1
Adding V-Series Camera to VIGIL Client