V-Series Camera Quick Start Guide |
VX-2V28-OD-I
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
5
3.
Attach the mounting base on the ceiling with screws.
Figure 1-4
Attach the Mounting Base
NOTE:
If required, you can route cables through the side opening on the side of the mounting base.
Figure 1-5
Side Opening
4.
Loosen the tilt lock screws, adjust the tilting position within the 65 degree range, and tighten the tilt
lock screws.
5.
Rotate the black liner to adjust the pan angle [0
°
~355
°
], tilt angle [0
°
~75
°
].
Tilt Adjust
Screw
0°~355°
0°~355°
0°~75°
Figure 1-6
Surveillance Angle Adjustment
NOTE:
As the lens has already been factory adjusted to the best image, you just need to adjust the panning
position and tilting position to get the desired surveillance angle.
Side Opening