Installation Manual for VISIX Network Cameras
3xLOGIC, Inc.
• 6510 West 91
st
Avenue • Westminster, CO 80031 • (877) 3XLOGIC • www.3xlogic.com
© 2007-2012 3xLOGIC. Inc. All rights reserved. Information subject to change without notice, 3xLOGIC logo is a trademark of 3xLOGIC, Inc.
8
Notes:
After the powering on of the camera, pressing and holding the RESET button for about 10
seconds can reset all the parameters to the default settings.
The type of auto-iris interface is shown in Figure 2-2, and the definition of each pin is shown
below:
Figure 2-2
Auto-iris Interface
Table 2-2
Pins
Video-driven
DC-driven
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.
Camera Wiring Diagram:
Figure 2-3
Wiring Diagram