Hardware and Installation Manual
|
VISIX V-Series All-in-One Cameras
–
Gen I
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
22
3.3
Part Names
1)
Safety Wire:
The dome cover is attached to the camera body with this safety wire to prevent
the dome cover from being dropped.
2)
Ambient Light Sensor:
Used to detect the level or the intensity of light for the IR operation. The
sensor should not be blocked by any object.
3)
MicroSD/SDHC Card Slot:
Up to 32GB supported. Class 4 and higher recommended for HD
recordings.
4)
Reset Button:
Use the button to restart the device or to reset it to Factory Default. Refer
to
the
3xLOGIC VISIX All-in-One Camera User Manual for more details on restarting/resetting to
factory default.
5)
RJ-45:
Connect an RJ-45 LAN cable for 10/100 Base-T Ethernet (PoE supported).
6)
DC Power Jack:
Connect the provided DC12V adaptor for the power supply unless it is PoE
powered.
* Models herein and their appearance are subject to change without any prior notice.
Reset Button
DC Power
RJ-45
Safety Wire
Ambient Light Sensor
microSD/SDHC Card Slot
❻
❷
❶
❺
❹
❸
Safety Wire
Ambient Light Sensor
mircoSD/SDHC Card Slot
Reset Button
RJ-45
DC Power