3Ware 3W-6800 - Escalade 6800 RAID Controller, Руководство пользователя

Страница: 41 / 174

3ware Disk Array Configuration Utility
www.3ware.com 31
Figure 11. Create Disk Array Display, RAID 5 Example
Select RAID configuration
The Escalade Storage Switch gives you a choice of four RAID con-
figurations. Select one.
• Stripe (RAID 0): maximizes performance and capacity through a
process called striping. High performance arrays write portions
of a single file across multiple drives. There is no fault tolerance.
• Mirror (RAID 1): duplicates or “mirrors” the data on both
drives. No data will be lost if one of the drives fails.
• RAID 10: combines mirroring and striping, providing both fault
tolerance and high performance. RAID 10 arrays require a
minimum of four drives. Configurations consist of 4, 6 or 8
drives.
• RAID 5: combines parity data and striping, providing fault toler-
ance, high capacity and high storage efficiency. The parity data
is distributed across all drives, rather than being concentrated on
C r e a t e D i s k A r r a y
Help Alt-F1
Change Value Enter
Previous/Next
Note: Creating an array will overwrite existing data on its drives.
Create a disk array from these drives:
Port 1 - IBM-DTLA-387815 512 M
Port 2 - IBM-DTLA-387815 512 M
Port 3 - IBM-DTLA-387815 512 M
Select RAID Configuration:
Array's Write Cache State:
enable
Cancel OK
Cancel Esc
Stripe Size:
64 KB
RAID 5