3Ware 3W-6800 - Escalade 6800 RAID Controller, Руководство пользователя

Страница: 162 / 174

3ware Escalade Storage Switch User Guide
152 www.3ware.com
Possible causes of APORT time-outs include a bad or intermittent
disk drive, power cable or ATA interface cable.
AEN 00Ah AEN_DRIVE_ERROR
As part of the recovery mechanism of the storage switch, various
drive failures can be detected and if possible corrected. One such
drive failure is when the drive indicates back to the storage switch
that it was unable to complete a command. If the drive returns an
error to the storage switch, the user is notified by this AEN.
AEN 00Bh AEN_REBUILD_STARTED
The storage switch notifies the user whenever it starts a rebuild.
The rebuild start may be user initiated (by selecting the rebuild but-
ton in the 3DM Disk Management Utility) or it may be auto initi-
ated by a hot spare failover. In either case, the user is notified of the
event by this AEN.
AEN 00Ch AEN_INIT_STARTED
The storage switch notifies the user by this AEN whenever it starts
an Initialization. Initialization occurs at array creation time.
AEN 00Fh AEN_SMART_FAIL
The storage switch supports SMART Monitoring. whereby the indi-
vidual drives automatically monitor certain parametric information
such as error rates and retry counts. By monitoring this data,
SMART may be able to predict a drive failure before it happens,
allowing a user to schedule service of the array before it becomes
degraded. The SMART status of each drive attached to the storage
switch is monitored daily. If a failure of any drive is determined to
be likely, the user is notified by this AEN.
AEN 021h AEN_UDMA_DOWNGRADE
The storage switch communicates to the ATA disk drives through
the Ultra DMA (UDMA) protocol. This protocol ensures data
integrity across the ATA cable by appending a Cyclical Redun-