18
2 On/Off Button - On/Off Switch
After powering on, the LED displays
which is the default time and the unit is
ready with normal working status.
Press On/Off button once and the cleaning starts. The cleaning stops when the timer
counts down to
. If the unit needs to be stopped before the timer runs up, press
On/Off button.
3 Function Button - Functions (Degas / Normal)
Press Function button, illuminates, indicating Degas function is selected. Press On/
Off button to start degassing., will fl ash for 2 minutes, then the unit will return to the
normal cleaning function. Pressing Function button before it ends will stop degassing.
If additional degassing is needed after it ends, press Function button again.
Degas
When cleaning heavily soiled or greasy items or silver, copper or brass items, chemical
solutions need to be added into the water. The solution may form many small droplets
and take a long time to dissolve in the water. Newly added water may generate many air
bubbles on the tank walls. These will reduce the cleaning eff ect in the beginning phase of
ultrasonic cleaning. Turning on the degas function will dissipate the droplets and the air
bubbles, usually in 2 minutes, and improve cleaning effi ciency.
4
—
Degas Status
Illuminated, the degas function is selected., — Flashing, degassing is underway.
5
—
Normal Cleaning Status
Illuminated, normal cleaning is underway.
6
—
Heater Status
Press TC button, fl ashes, indicating the heater is turned on. Press TC button again,
dims, indicating the heater is turned off .
7
Actual – Water temperature display. It displays the actual water temperature in the tank.
8
Digital LED display of working time. It counts down after work is started.
9
Set – Set temperature display. Press Temp button to select one of the 5 set
temperatures.
10
Time button — Timer quick set button. Press Time button, LED display shows
.
Each pressing increases it by 5 minutes
11
Button — Timer decreasing button. Each pressing reduces the timer by 1 minute.
12
TC button — Heater button. Pressing TC button, fl ashes, indicating the heater is
turned on. To cancel heating, press TC. dims, indicating the heater is turned off .
When the water reaches the set temperature 60ºC (140ºF), the heater will turn off
automatically.
13 Temp button – Temperature set button.
5 set temperatures can be selected. The
default temperature is 40ºC. Press Temp button to select the temperature in the
following sequence:
Содержание USC-6L
Страница 80: ...79...
