Blinking
The port is receiving data
【
Logging in to WEB Interface
】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device’s configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed
Step 2
Enter device’s IP address in the address bar of the
computer browser.
Step 3
Enter device’s user name and password in the
login window as shown below.
Step 4
Click “Login” button to login to the WEB interface of
the device.
Note:
The default IP address of the device is “192.168.1.254”.
The default user name and password of the device are
“admin”.
If the user name or password is lost, user can restore it
to factory settings via restore button or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Performance Index
】
Panel
100M Copper Port
10/100Base-T(X) self-adapting RJ45
port
RS-232/485/422
3IN1 serial port
DB9 Interface
Console port
CLI command management port
(RS-232), RJ45
Indicator
Power indicator, Running status
indicator, Network Link/Act indicator,
Serial port transmission/receiving
state indicator
Power supply
Input power
supply
12
~
48VDC
Access terminal
block
8-pin 5.08mm pitch terminal blocks
(power supply occupies 4 pins in the
left)
Power
consumption
No-load
1.8W@12VDC
Full-load
1.9W@12VDC
Working
Environment
Working
temperature
-40
~
75
℃
Storage
temperature
-40
~
85
℃
Working humidity
5%
~
95%(no condensation)
Physical
Characteristics
Protection grade
IP40 (metal shell)
Size (L×W×H)
138mm×110mm×33mm
Weight
The maximum value is about 484g
Mounting
DIN-Rail Mounting