3onedata IES618 Series Скачать руководство пользователя страница 31

Страница: 31 / 92

User Manual

3onedata proprietary and confidential

Note:
IGMP snooping means snooping the messages between user host
and router, as well as tracking multicast information and the ports
that have been applied for.

IGMP Query

The switch of IGMP query, options are:



Enable;



Disable;

Note:
IGMP query means that router inquiring all hosts in subnet if they
join some multicast groups.

IGMP query interval

IGMP query interval, unit: second.

Description:
The time range that can be entered is 60-1000s.

Group survival

The maximum time that multicast members in device can

survive from existence to not receiving any response. Unit:

second.

Description:



IGMP snooping needs to be enabled before using this

function.



The time range of group survival that can be set is 120-5000s.

Routing port set

Choose the building mode of routing table, options are:



Dynamic routing, routing ports are dynamically acquired

though switch.



Static routing, check the box of port in “port list” as

routing port.



You need to set multicast source and port in one VLAN first to enable IGMP Snooping

function.



Multiple IGMP inquirers should be avoided in network lest cause waste of resources.

Please choose all ports if the forwarding relationship of unknown multicast group is

uncertain.

4.2.2

Static Filtering

Static multicast filtering is used to set the forwarding port of static MAC address, one

or multiple forwarding ports can be specified. Static MAC Address requests a valid

input from user. If the input is a invalid MAC address, a message warning would pop

up.

Содержание IES618 Series





























































































Результаты поиска

Содержание IES618 Series

Отзывы:

Бренды по названию

Популярные бренды

3onedata IES618 Series, Руководство пользователя

Результаты поиска

Содержание IES618 Series

Отзывы:

Бренды по названию

Популярные бренды