3M Xtract 64256, Руководство пользователя

Страница: 14 / 32

14
NOTE
Vacuuming materials that are undercuried might prematurely clog the fi lter
and will lead to damages.
5 Emptying the Container
NOTE
Only permitted for dust with workplace exposure limits > 1 mg/m³.
» Switch off the dust extractor, pull out the mains plug.
» Open the latches.
» Remove the cover and suction hose from the container.
» Empty the container by pouring out.
5.1 Dispose of the Fleece Filter Bag (if available)
»
Switch off dust extractor.
» Disconnect mains plug.
» Wear appropriate breathing mask.
» Remove suction hose.
» Close off intake socket with cap.
» Open side latches.
» Remove top section.
» Carefully pull the fl ange off the intake socket and close off the fl ange.
» Dispose of gathered material in accordance with legal requirements.
5.2 Dispose of the PE Emptying and Disposal Bag
»
Set switch to position >I+<.
✓
Folded fi lter cartridges are cleaned automatically.
✓
Residual dust in the fi lters falls into the bag.
» Switch off dust extractor.
» Disconnect mains plug.
» Wear appropriate breathing mask.
» Remove suction hose.
» Close off intake socket with cap.
» Open side latches.
» Carefully close the PE emptying and disposal bag with the enclosed sealing tape.
» Carefully pull the fl ange off the intake socket and close off the fl ange.
» Carefully remove the PE emptying and disposal bag from the container.
» Dispose of gathered material in accordance with legal requirements.
5.3 Insert Fleece Filter Bag (if available)
NOTE
Only use fl eece fi lter bags for dry vacuum cleaning.
» Slide the fl ange completely over the intake socket.
NOTE
Operating the rotary slide
»
Turn the red rotary slide inside to position CLOSE to the stop on the marker
▲
.
5.4 Insert PE Emptying and Disposal Bag
NOTE
Operating the rotary slide
»
Turn the red rotary slide inside to position OPEN to the stop on the marker
▲
.
» Slide the fl ange completely over the intake socket.
» Place the upper bag opening over the container rim.
6 Changing the Filter
» Clean the fi lter cartridges before changing them.
» Turn the lock on the latch through 90° in a counterclockwise direction with a
coin or similar object and push the latch to the rear.
» Fold up the cover.
» Immediately isolate the folded fi lter cartridges that you have removed in a dust-
tight plastic bag and dispose of properly in accordance with the requirements.
» Insert new folded fi lter cartridges.
» Lift the locking bracket up, fold down the cover and click in place with light pressure.