3M W-3060 Скачать руководство пользователя страница 7

compressor is equipped with a high temperature alarm and automatic shut-down. 
 

1

Formation of carbon monoxide in air compressors, Am. Ind. Hyg. Assoc. J (40), June 1979, pp. 548-551. 

 

 

To meet the NIOSH requirement 42 CFR 84, subpart 84.150 for minimum and maximum airflow (4 to 15 
cfm, 115 to 425 lpm), these air control devices approved for use with the 3M™ 7000 or 6000DIN Series Full 
Facepieces must be operated within the supply pressure ranges and hose lengths stated in the “Specifications” 
section.  Failure to do so

 may affect respirator performance and result in sickness or death. 

You must comply with OSHA standard 29 CFR 1910.134, which states that, "Airline couplings shall be 
incompatible with outlets for other gas systems to prevent inadvertent servicing of airline respirators with 
nonrespirable gases or oxygen".  In Canada, refer to the requirements of CSA standard Z180.1 or the 
authority having jurisdiction in your region.  

Failure to do so may result in sickness or death.

 

Your employer must provide breathing air that meets at least the requirements of the specification for Grade 
D breathing air, as described in the Compressed Gas Association Commodity Specification G-7.1-1997 in the 
United States.  In Canada, refer to CSA standard Z180.1, table for the quality of compressed breathing air.  

Failure to do so may result in sickness or death.

 

The line pressure must be kept within safe limits, 125 psig (8.75 kg/cm

2

) maximum.  Dirt, oil and water, 

unless trapped or filtered out, may continue downstream in concentrated form and adversely affect the 
performance of the respirator and 

may result in sickness or death

 

 

 
SYSTEM COMPONENTS AND REPLACEMENT PARTS 
 

3M™ Continuous Flow Adapter Kits

 

 

W-3061 Air Regulating Kit Includes: 
-

W-3253 Air Regulating Assembly, which includes:  

-W-3062 Air Regulating Valve 
-W-3217 Waist Belt 

-W-3187 Airline Adapter  
-W-3188 Breathing Tube 
-W-3229 Shoulder Strap 
-7890 Full Face Plug 
 

W-3060-25, Airline Adapter Kit Includes: 
-

W-3061 Air Regulating Kit 

-W-9435-25 High Pressure Supplied Air Hose, 25 ft, 3/8” ID, Industrial Interchange Fittings 
 

W-3060-50, Airline Adapter Kit Includes: 
-

W-3061 Air Regulating Kit 

-W-9435-50 High Pressure Supplied Air Hose, 50 ft, 3/8” ID, Industrial Interchange Fittings 
 

W-3060-100, Airline Adapter Kit Includes: 
-

W-3061 Air Regulating Kit 

-W-9435-100 High Pressure Supplied Air Hose, 100 ft, 3/8” ID, Industrial Interchange Fittings 
 

 

7

Содержание W-3060















Отзывы: