![background image](http://html1.mh-extra.com/html/3m/steri-vac-gs5x/steri-vac-gs5x_operators-manual_442944045.webp)
44
3M
™
Steri‑Vac
™
Sterilizer / Aerator GSX Series
– Operator’s Manual
11.6. Importing Custom Cycles to the 3M™ Steri‑Vac™ Sterilizer/Aerator GSX Series
Importing custom cycles onto the 3M™ Steri‑Vac™ Sterilizer/Aerator GSX Series requires a Supervisor PIN
3M Health Care service personnel or authorized 3M service personnel must
create the first Supervisor user and PIN on the GSX Series sterilizer.
Additional Supervisor users and PINs can be created by established Supervisors
1�
Insert a Universal Serial Bus (USB) drive into one of the two available ports located behind the GSX Series sterilizer access door (Figure 51) Recommended USB drives include drives with
FAT32 formatting Drives with pre‑loaded software (eg, SanDisk’s Cruzer®) are not recommended Only USB drives, for the sole purpose of exporting data, are to be connected to the USB
ports Do not connect external USB devices that supply power
Figure 51
Inserting a USB Drive into the sterilizer
USB Port
2�
Go to
Menu>Setup>Import/export cycles
(Figure 52) Import/export of custom cycles requires a Supervisor PIN
Custom cycles must be saved in a Folder on a USB drive.
The GSX
Series sterilizer only looks for Folders on the USB drive at the beginning of the cycle import process
Sterilizer
22.2
Select cycle temperature:
˚
C
04/20/2015
05:20:11
6
5
4
3
2
1
7
98.0
kPa
Reports
Cycles
Setup
Status
Service
CSX 38C
CSX 55C
Site setup
User setup
Import/export cycles
Figure 52
Selecting the Import/Export
Cycles Option