![background image](http://html1.mh-extra.com/html/3m/steri-vac-gs5x/steri-vac-gs5x_operators-manual_442944024.webp)
22
23
1042 Supervisor Cycles
Selecting Supervisor Cycles requires a Supervisor Personal Identification Number (PIN) which is established in
Menu>Setup>User setup
Selecting Supervisor Cycles allows the Supervisor
Cycles to appear on the Main Screen (Figure 19) in place of the Operator Cycles Figure 18 shows the Cycles Option Menu ‑ Supervisor Cycles
Sterilizer
22.2
˚
C
6
5
4
3
2
1
7
98.0
kPa
04/20/2015
05:19:55
Aeration
Cartridge Dispose
Reports
Cycles
Setup
Status
Service
Operator cycles
Supervisor cycles
Select cycle:
Figure 18
Cycles Option Menu ‑
Supervisor Cycles
There are two (2) preprogrammed Supervisor Cycles: Aeration and Cartridge Dispose Program each cycle by following the step‑by‑step instructions as they appear on the screen
1�
Aeration
performs aeration only at the selected temperature Duration is user‑programmed in either 30 minute intervals or continuous
2�
Cartridge
Dispose
is a custom abbreviated cycle used to safely empty and aerate 3M™ Steri‑Gas™ EO Gas Cartridges at the rate of one per cycle This cycle cannot sterilize devices
Refer to the Cartridge Dispose Cycle ‑ 3M™ Steri‑Gas™ EO Gas Cartridges section for additional information
Sterilizer
22.2
˚
C
98.0
kPa
Open door
Menu
Menu
Select cycle:
04/20/2015
05:20:15
6
5
4
3
2
1
7
Aeration
Cartridge dispose
Figure 19
Main Screen ‑ Supervisor
Cycles Displayed