manualshive.com logo in svg

3M Staff Workstation 795, Руководство для персонала

Поделиться
Скачать
3M Staff Workstation 795 Скачать руководство пользователя страница 11

 

 

 

7

 

EMC Compliance USA and Canada 

FCC Radio Frequency Rules and Regulations 

This equipment has been tested and found to comply with the limits for a 
Class A device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment 
generates, uses, and can emit radiated radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in 
a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense. 

FCC Intentional Radiator Certification 

This equipment contains an intentional radiator 
approved by the FCC under the FCC ID number 
shown above. This device complies with Part 15 of the 
FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any 
interference received, including interference that may 
cause undesired operation. 

 

FCC ID: DGF-LSD795 

NO MODIFICATIONS. Modifications to this device shall not be made without 
the written consent of The 3M Company. Unauthorized modifications may 
void the authority granted under Federal Communications Commission Rules 
permitting the operation of this device.  

Industry Canada Radio Frequency Rules and Regulations 

This Class A digital apparatus meets all requirements 
of the Canadian Interference-Causing Equipment 
Regulations. 

Cet appareil numerique de la classe A respecte toutes 
les exigences du Reglement sur le materiel brouilleur 
du Canada. 

 

CANADA: Pending 

Operation is subject to the following two conditions: (1) this device may not 
cause interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation of the 
device. 

EMC Compliance Europe 

This equipment complies with the requirements of the 
RTTE and EMC directives. 

 

 

Содержание Staff Workstation 795













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды