• On plastic fittings, never use pipe sealant or pipe dope. Use PTFE thread tape
only,
pipe dope properties may deteriorate plastic.
• Take care when using pliers or pipe wrenches to tighten plastic fittings, as damage may occur if overtightening occurs.
•
Do not
install in direct sunlight or outdoors.
•
Do not
install near water pipes which will be in path of a drilling tool when selecting the position to mount the bracket.
• Install system in such a position as to prevent it from being struck by other items used in the area of installation.
• Ensure that the location and fasteners will support the weight of the system when installed.
• Ensure all tubing and fittings are secure and free of leaks.
IMPORTANT NOTES
•
Failure to follow instructions will void warranty.
•
Allow a minimum of 3” (7.6 cm) clear space under filter cartridge to facilitate cartridge change.
•
Install with the inlet and outlet ports as labeled. Make sure not to reverse connections.
•
Some local codes may require the use of a licensed plumber or certified installer when disrupting a potable water line.
Parts included for “ADD ON expansion head” Model SH-EXP, part number (6235201):
1. (1) Modular conversion head and bracket (Assembled)
2.
(2) Double Ended Connectors (W/ O Rings)
3.
(4) Retention clips
2
