3M SelfCheck System 7210, Руководство пользователя

Страница: 8 / 34

8
EMC Compliance USA and Canada
FCC Radio Frequency Rules and Regulations
This equipment has been tested and found to comply with the limits
for a Class A device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can emit radiated
radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC Intentional Radiator Certification
FCC ID: DGF -LSD7210
This equipment contains an intentional radiator approved by the FCC
under the FCC ID number shown above. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NO MODIFICATIONS. Modifications to this device shall not be made
without the written consent of The 3M Company. Unauthorized
modifications may void the authority granted under Federal
Communications Commission Rules permitting the operation of this
device.
Industry Canada Radio Frequency Rules and
Regulations
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigences
du Reglement sur lemateriel brouilleur du Canada.
CANADA: Pending
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation of the device.