3M SelfCheck System 7210, Руководство пользователя

Страница: 19 / 34

19
SelfCheck™ Manager Procedures
This section contains common procedures for configuring and
adjusting the SelfCheck Manager.
Mode Procedures
Use the following procedures to set the SelfCheck™ System in
different modes of operation:
SelfCheck System Mode
Select SelfCheck from the Modes menu. This sets the SelfCheck
system for normal patron operation.
Out of Service Mode
Select Out of Service from the Modes menu. This sets the
SelfCheck system in the out of service mode and shows the out of
service graphic on the screen. When the
Out of Service graphic is
displayed, pressing the escape key (Esc) on the returns you to the
SelfCheck™ Manager.
Demonstration Mode
Select Demonstration from the Modes menu. Putting the
SelfCheck system in the demonstration mode allows check out of
items for training or demonstration purposes. While in the
demonstration mode the SelfCheck system does not communicate
with any other system.
Circulation Procedures
SelfCheck System Use: Check-in, Check Out, or Patron Selectable
The SelfCheck system is used to check-in or checkout library items.
The SelfCheck system may be set to allow the patron to choose
check-in or checkout, or it may be set for check-in or checkout only.
1
Click Policy from the Configure menu.
2
Click the Circulation tab on the Policy
Properties window.
3
Click the button next to the desired
mode.
4
Click OK .
Policy Properties window - Circulation tab