Measure
Logged Data
Sound Examiner SE-400 Series
19
Measure
Logged Data
Logged measurements compute the peak, maximum, minimum, sound exposure, and average values over a run-time at
the user selected logged interval.
When in a run (or a session), logged data is automatically stored in the instruments memory. The summary data is viewable
on the display of the instrument while the logged data is viewable in DMS. Below is an example of DMS’ logged data chart.
Figure 4-5: Example of logged data in DMS
Windscreen
The SE-400 Series features a removable windscreen, which is primarily used to help reduce noise effects
from wind with minimal effects on the readings. It is recommended to place and use the windscreen over the
microphone at all times to help protect the microphone.
Figure 4-6: SE-400 Series with windscreen
•
Peak
values over the run-time
•
Maximum
values over the run-time
Windscreen
The windscreen is placed over the microphone
