3M SE-401 Скачать руководство пользователя страница 20

Страница: 20 / 121

Setup/instrument configuration

Auto-Run and setting timed run

Sound Examiner SE-400 Series

Auto-Run and setting timed run

With a Timed Run mode, you program the instrument’s duration (or timed run) and then manually start your

study. The Auto-Run will end when the duration expires.



Setting the Timed Run

1. From the setup screen, select Auto-Run by pressing the / keys and press key.

2. Auto-Run will appear. To select disabled or timed run field, press the key.

Figure 3-7: Auto-Run screen

3. To select timed run, press / keys until it appears and press key. The duration field will

appear. (See Figure 3-8 below.)

•

Note: to turn off this feature repeat this step until disabled appears.

4. To enter in a time, press key to move the time field. Using the / keys, change the time

and press key while repeating this to move to the hours, minutes and seconds field.

5. Press key to save and press key twice to return to the measurement screen.

•

Note: Remember to manually press Run key to begin the Timed Run.

Figure 3-8: Auto-Run screen

Timed run is set for 8 hours and 30 minutes

To activate, change the disabled field to
Timed Run following steps above.

Содержание SE-401


























































































































Результаты поиска

Содержание SE-401

Отзывы:

Похожие инструкции для SE-401

Бренды по названию

Популярные бренды

3M SE-401, Руководство пользователя

Результаты поиска

Содержание SE-401

Отзывы:

Похожие инструкции для SE-401

Бренды по названию

Популярные бренды