3M
™
Super Close Projection System SCP716/SCP716W
Product Safety Guide
©
3M 2009. All Rights Reserved
4
Regulatory Notices
Video signal cables: Only use cables delivered by the manufacturer.
FCC STATEMENT - CLASS A:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Instructions to Users:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Notice:
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.
Instructions to Users:
This equipment complies with the requirements of FCC equipment provided that the following conditions are met.
The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.
Note:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
CE STATEMENT
Electromagnetic Compatibility Statement:
Meets 2004/108/EC Directive
Low Voltage Directive:
Meets 2006-95-EC Directive.
WEEE STATEMENT:
The following information is only for EU-members States: The mark shown to the right is
in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates
the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection
systems according to local law.
RoHS STATEMENT:
3M Projection Systems can provide RoHS certification for products meeting the RoHS
directive.
1
European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC.
1
RoHS compliant means that the product or part does not contain any of the substances in excess of the following maximum
concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS, as amended:(a)
0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01%
(by weight) for cadmium. This information represents 3M’s knowledge and belief, which may be based on information provided by third
party suppliers to 3M.
