Operating QUESTempº 44/46
053-664, RevC.
QUESTempº 44 & 46 models
12
2.
Press
I/O Enter
key and press
Up/Down Arrow
key
to change the values.
The
I/O Enter
key is pressed to toggle through the changeable fields and to
return to the first column.
Allows printing to a parallel or serial printer or to a computer. The QuesTemp
º
44/46 will recognize the cable plugged in and configure itself for serial or parallel.
If no cable is plugged in, it will default to serial. Press
I/O Enter
key to begin
printing. Press
Run/Stop
key to return to the menu.
NOTE:
if you wish to stop the printing, press I/O enter key until you return to
the main menu. When the printer has stopped printing, remove the cable from the
printer to the instrument.
Reset
Resetting enables you to clear the logged data from memory. Press the
I/O Enter
key
to enter the
Reset mode
. Clear the memory by holding down the
I/O Enter
key
while the display counts down from three.
Run
The run mode begins a session in memory and logs the data.
1.
Begin a session by pressing the
Run/Stop key
from the view mode (or
measurement view). An asterisk in the lower right corner indicates the run
mode.
To toggle through the views, press the up or down arrow.
Figure 1-8 Run mode indicator
2.
End the session by pressing the
Run/Stop key
again. (The session will stop
recording when the asterisk is no longer displayed.)
NOTE:
If the logging memory is full or if there are no sensors plugged into the
unit, attempting to enter the Run mode will result in an error message. If the
memory capacity is exceeded, the asterisk in the lower right corner of the display
will turn into an “F” and the memory remaining screen will show “0.0”.
WBGTi
66.7
º
F
1
WBGTo
68.6
º
F
Run indicator
