3M PROTECTA AM100, Инструкция пользователя

Страница: 6 / 100

6
;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.
PRODUCT DESCRIPTION:
Figure 1 illustrates the 3M™ Protecta Tripod. The Tripod is a single point anchorage connector for a personal fall arrest system
designed to be erected over the opening and meant to lower and raise the user into and out of the opening. The tripod is
constructed of lightweight tubular aluminum legs with an aluminum head assembly and steel chain. The tripod can be combined
with a variety of pulleys, winches and fall-arrest devices to meet a wide range of confined space entry, retrieval, and rescue
requirements. Quick release pins positively locate components at all adjustment points for tool-less setup and adjustment. The
Tripod can be used as a support structure for various types of safety devices. Some of these can mount directly to the anchor
point at the top of the tripod head, while others may require an adapter bracket.
Figure 2 illustrates components of the Tripod. See Table 1 for Component Specifications. The Tripod Hoist is comprised of three
Tubular Legs (C) with a Head Assembly (A) at the apex of the Tubular Legs. The Tubular Legs are grounded by padded Feet (B)
and the Legs are operable through manipulation of the Leg Adjustment Pins (F) and Locking Pins (D). Once set, the Legs are
secured using the Chain (G). The Eye Anchor Bolt (E) below the Head Assembly is used for installation of a winch or SRD for
rescue or retrieval purposes.
Table 1 – Specifications
System Specifications:
Fall Arrest
Capacity :
Two persons with a combined weight (clothing, tools, etc.) of no more than 140 kg (310 lb.) each.
Material Handling
Capacity:
For material handling purposes, maximum capacity is 500 kg (2923 lb.).
Rescue Capacity: One person with a combined weight (clothing, tools, etc.) of no more than 132 kg (292 lb.).
Anchorage: Fall Arrest:
The structure to which the Anchorage Connector is attached must sustain static loads applied in the
directions permitted by the Fall Arrest System of at least 13 kN (2923 lbf).
Maximum Allowed Arresting Force (MAF) rating for retractable devices or shock absorbers is 6 kN (1350
lbf).
Dimensions: See Figure 1 for the dimensions of the Tripod.
Product Weight: 17.6 kg (38.9 lb.)
Standards: Meets the test requirements of EN795.2012 and CEN/TS 16415.2013.
Component Specifications:
Figure 2
Reference Component Materials Note:
A Head Assembly Aluminum
B Foot Assembly
Aluminum, with a
rubber pad on each foot
C Leg Assembly Aluminum
D Locking Pin Stainless steel
E Eye Anchor Bolt Stainless steel
Only the center Eye Anchor may be used
for Fall Arrest.
F Leg Adjustment Pin Stainless steel
G Chain Zinc plated steel
AM100 Tripod Dimensions
Figure 1
Reference
Minimum Maximum
Overall Height (A) 1463 mm (57.6 in) 2415 mm (95.1 in)
Eye Anchor Bolt
(B)
1334 mm (52.5 in) 2286 mm (90.0 in)
Working Field (C) 825.5 mm (32.5 in) 1372 mm (54.0 in)
Outside of Shoe
(D)
1783 mm (70.2 in) 2878 mm (113.3 in)
Storage Length (E) 1702 mm (67.0 in)