3M PROTECTA 2190057, Инструкция пользователя

Страница: 12 / 28

Table 2 – Inspection and Maintenance Log
Model Number (Serial Number):
Date Purchased:
Date of First Use:
···
;
This product must be inspected by the user before each use. Additionally, a Competent Person other than the user must
inspect this equipment at least once each year.
···
Component Inspection Procedure
Inspection Result
Pass Fail
Concrete Strap Anchor
(Figures 2,9)
Inspect the D-Ring for damage. It must not be broken, distorted,
or have any sharp edges, burrs, cracks, worn areas, or corrosion.
Inspect the webbing of the anchor across all areas. All webbing
material must be free of cuts (A), fraying (B), heavy soiling (C),
and welding burns (D). Check for tears, abrasions, mold, burns,
discoloration, and broken fibers. Check for pulled or cut stitches.
Broken stitches may indicate that the anchor has been impact
loaded and must be removed from service.
Anchorage Structure
Verify that the anchorage structure meets the requirements of this
instruction. Verify that the install location has no signs of damage.
Labels (Figure 8) All labels are present and fully legible.
Fall Protection Equipment
Additional Fall Protection equipment that is used with the product
is installed and inspected per the manufacturer instructions.
···
;
If the product fails an inspection procedure, then the product fails overall inspection. If the product fails inspection, remove
it from service immediately. Clearly tag the product “DO NOT USE”. See Section 5 for more information.
···
Inspection Type: User Competent Person Overall Inspection Result: Pass Fail
Inspected By: Date of Inspection:
Signature: Next Inspection Due:
···
Additional Notes: