6
6.8. TO FIT THE RCU-300
1. Pull and lift the locking bracket of the RCU-300 outwards
and upwards.
IMPORTANT!
Make sure that the RCU-300 is placed
within arm-length from the SCU-300.
2. Slide the RCU-300 onto the rail system.
IMPORTANT!
Make sure that the locking bracket is facing the
barrel.
3. Fold down the locking bracket of the RCU-300.
4. Pull the RCU-300 towards the barrel to lock it into place.
6.9. TO CONNECT TO AN EXTERNAL RADIO
1. Power on the radio.
2. Ensure radio volume is set to a comfortable level.
3. Connect the cable to the radio. For instructions how to
connect the radio, refer to the radio manual.
4. Align the markings on the cable to the markings on the
SCU-300.
IMPORTANT!
Make sure to select the correct socket on
the SCU-300 for the radio.
5. Connect the cable with the SCU-300 and turn the cable
clockwise to lock into place.
6.10. TO CONNECT AN EXTERNAL INTERCOM
1. Connect the cable to the intercom system. For instructions
how to connect the intercom system, refer to the intercom
manual.
2. Align the markings on the cable to the markings on the
SCU.
IMPORTANT!
Make sure to select the correct socket on
the SCU-300 for the intercom system.
3. Connect the cable with the SCU-300 and turn the cable
clockwise to lock into place.
6.11. TO CONNECT COMTAC™ VII WITH CABLE
The SCU-300 is designed to connect via cable to the
ComTac™ VII headset when wireless connectivity is not
desired.
1. Align the marking on the cable with the marking on the
socket on the SCU-300.
IMPORTANT!
Make sure to connect the ComTac™ VII to
the socket with the headset marking on the SCU-300.
2. Connect the cable with the SCU-300 and turn the cable
clockwise to lock into place.
EN