3M Nano-Lok 3100468, Инструкция пользователя

Страница: 15 / 24

15
;
Before using this equipment, record the product identification information from the ID label in the ‘Inspection and
Maintenance Log’ at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3m website or contact 3M
Technical Services for updated instruction manuals.
DESCRIPTION:
Figure 2 identifies key components of the 3M™ DBI-SALA
®
Nano-Lok Self-Retracting Lifeline Tie-Backs (SRLs). Nano-Lok SRLs
are 9 ft. (2.7 m) or 11 ft (3.3 m) Lanyards, equipped with an in-line Load Indicator (C) and RFID tag (D). The lifeline (E)
retracts into a Thermoplastic Housing (F) . A Swivel Eye (G) on the top of the Housing allows attachment to a valid anchorage
connection point with a Carabiner, or mounting on a Full Body Harness with a Harness Interface. They are available in multiple
model configurations that allow tie-back (B) attachment to an anchorage point with a snap hook (A) and single or dual mounting
on a Full Body Harness (see Figure 7). The Nano-Lok SRL automatically locks at the onset of a fall to arrest the fall, but pays out
and retracts lifeline during normal movement by the attached user. The Tie-Back hook and Tie-Back portion of lifeline allow this
unit to be tied back around structural members that meet anchorage requirements. See Table 1 for Nano-Lok SRL and connector
specifications.
Hot Work: Fire resistant “Hot Work” models are available for welding, foundry work, etc., where the SRL may be exposed
to sparks or flames.
Arc Flash : Meets the test requirements of the ASTM F887 standard and is designed for use in environments where an arc
flash (electrical explosion) could occur.
Table 1 – Specifications
Component Specifications:
SRL Housings Nylon
Drum Nylon
Internal Components Stainless Steel, Aluminum
Web Lifeline Standard: Dynema Polyester, Hot Work: Kevlar Nomex, Arc Flash: Kevlar Nomex
Energy Absorber
Standard Cover: Nylon, Standard Web: Polyester, Standard Stitching: Polyester or Nylon Thread
Hot Work and Arc Flash Cover: Kevlar Nomex, Hot Work and Arc Flash Web: Nomex, Hot Work and Arc Flash
Stitching: Kevlar Nomex
Swivel Zinc Plated Steel
Connector Specifications:
Description Material Gate Opening Gate Strength Tensile Strength
1 Carabiner Aluminum 19 mm (.75 in) 16 kN (3,600 lbs) 22.2 kN (5,000 lbs)
2 Carabiner Steel 17 mm (.67 in) 16 kN (3,600 lbs) 22.2 kN (5,000 lbs)
3 Twin SRD Interface (Fixed D-Ring) Steel 19 mm (.75 in) 16 kN (3,600 lbs) 22.2 kN (5,000 lbs)
4 Twin SRD Interface Steel w/Nylon Insert 19 mm (.75 in) 16 kN (3,600 lbs) 22.2 kN (5,000 lbs)
5 Single SRD Interface Steel 17 mm (.67 in) 16 kN (3,600 lbs) 22.2 kN (5,000 lbs)
6 Twin SRD Interface Steel 19 mm (.75 in) 16 kN (3,600 lbs) 22.2 kN (5,000 lbs)
7 Snap Hook Steel 21 mm (.83 in) 16 kN (3,600 lbs) 22.2 kN (5,000 lbs)
Performance Specifications:
SRL Specifications (Vertical) Standard Weight Heavy Weight
Capacity Range 59 kg - 140 kg (130 lbs - 310 lbs) 141 kg - 191 kg (310 lbs - 420 lbs)
Maximum Arresting Force 6 kn (1350 lbf) 6 kn (1350 lbf)
Average Arresting Force NA NA
Claimed Maximum Arresting Distance
1
1.07 m (42 in) 1.07 m (42 in)
Minimum Fall Clearance Required
1
1.2 m (4 ft) 1.5 m (5 ft)
Maximum Free Fall 2 0 m (0 ft) 0 m (0 ft)
1 - Assumes the SRL is mounted directly above (overhead) the end user.
2 - SRL must be mounted above user D-Ring.
3 - Measured from user D-Ring to walking/working surface. Refer to Fall Clearance Chart(s) for details.